miniland baby basic light Manual De Instrucciones página 8

Select the channel for transmission. Transmitter will pick up baby's sounds automatically

and transmit it to receiver immediately.
Sound is transmitted by VOX (Voice Activation).

Night Light can be turned on by switching the Off/On/VOX button to the ON position. This

is indicated by continuous luminance of orange night light of the transmitter.
Rainbow Night Light can be turned on by switching the Off/On/VOX button to the VOX

position. This is indicated by consecutive luminance of several colors of night light, for
around 20 seconds of duration.
• Setting – Receiver
The receiver can be operated by AC/DC adaptor or with 3X AAA rechargeable batteries

The receiver is fitted with a belt clip that you can clip it onto your belt.

Switch on the receiver by turning the ON/OFF channels switch to the channel A or B position.

The red power light should be ON.
Please make sure the channel selected is on the same as transmitter.

Rotate the Volume switch until the desired sound level is obtained.

There are 5 LED lights to indicate the intensity of the sound. The louder the sound is received

by the Receiver, the more lights will illuminate.
• Troubleshooting
With this wireless baby monitor, you have acquired a product manufactured according to the
state-of-the-art technology and is therefore safe for operation. Nonetheless, problems or
disturbances can still arise. Therefore, we now want to explain how you can easily eliminate
possible disturbances on your own.
If the transmitter is placed too far away from the receiver, sound disturbances could occur or

transmission could be terminated. In this case, move them closer together.
If the receiver placed too close to the transmitter, a whistling sound (acoustic feedback)

could occur. In this case, increase the distance between them or decrease the volume.
Continuous background noise from the receiver could mean that the batteries no longer

have sufficient capacity and should be changed.
• Care
Always disconnect mains-powered devices before cleaning (pull out plug).

Remove all the batteries from the receiver's battery compartment if the item is not for use in

long period of time.
Clean device with a damp cloth do not use cleaning agents.

• Datos Técnicos
Radio range: 130 metres (Open field)
Frequency: 40.695MHz / 40.665MHz
Power
Adaptor Input: 230V/50Hz
Transmitter
Power Input: 9V/200mA
Receiver
Power Input: 9V/200mA