Cleaning The Interior; Main Components - AFG 900 Serie Instrucciones Para Instakkacion, Uso Y Manteniniento

•
Re-assemble all parts. For assembly, proceed in reverse
order.
Replacing the thermocouple
•
Remove the control panel.
•
Remove the panel below oven door.
•
Remove and replace the component.
•
Re-assemble all parts. For assembly, proceed in reverse
order.
19.3 ELETTRIC OVEN
Replacing the knob and indicator light
•
Remove the control panel.
•
Remove and replace the component.
•
Re-assemble all parts. For assembly, proceed in reverse
order.
Replacing the working thermostat and safety thermostat
•
Remove the control panel.
•
Remove the bulb from its seat on the side of the oven.
•
Remove and replace the component.
•
Re-assemble all parts. For assembly, proceed in reverse
order.
Replacing the heating element
•
Remove the oven floor (only for lower heating elements).
•
Undo the screw securing the element to the oven and pull
the element out by approx. 10 cm.
•
Remove and replace the component.
•
Re-assemble all parts. For assembly, proceed in reverse
order.

20 CLEANING THE INTERIOR

•
Check the condition of the inside of the appliance.
•
Remove any built-up dirt.
•
Check and clean the fumes exhaust system.

21 MAIN COMPONENTS

21.1 GAS HOB
•
Gas tap
•
Main burner
•
Pilot burner
•
Thermocouple
21.2 GAS OVEN
•
Gas valve
•
Main burner
•
Pilot burner
•
Thermocouple
•
Igniter
•
Piezoelectric ignition
21.3 ELECTRIC OVEN
•
Selector
•
Working thermostat
•
Safety thermostat
•
Heating element
•
Indicator light
50