Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5. Reassemble the silicone sealing ring onto the steel frame after cleaning.
Push them onto the center post
Cleaning the accessories
− Remove the condensation collector
empty and wash it thoroughly. Let it dry completely and return it back to the
original position.
− Clean the rice spatula
steaming rack
dry them thoroughly.
Replacing the silicone sealing rings
− The silicone sealing ring
washer
are wearable parts and must be replaced if damage is found.
40
− Contact the manufacturer for replacement using the service address
specified on the warranty card.
Any other servicing should be performed by an authorized
service representative.
Storage
All parts must be completely dry before being stored.
− Always store the pressure cooker in a cool, dry and clean area.
− Protect the pressure cooker from direct sunlight.
− To reduce wear and tear on the silicone sealing ring
upside down or loosely on the pressure cooker for storage.
− Store the pressure cooker so that it is not accessible to children.
Troubleshooting
NOTICE!
Risk of damage!
Improper handling of the pressure cooker may result in damage
to the pressure cooker.
− Do not open the housing of the pressure cooker; instead,
have qualified professionals perform any repairs. Contact
a qualified workshop for this. Liability and warranty claims
, soup ladle
18
in soapy water with a non-abrasive sponge. Rinse and
16
, float valve sealing ring
6
on the underside of the lid (see Fig. M).
39
14
from the base unit
, measuring cup
19
and then
11
and
17
and silicone
38
6
, place the lid
Storage
4
31
Publicidad
Capítulos
Tabla de contenido
Solución de problemas
