Ambiano GT801-M091 Manual Del Usuario página 32

Troubleshooting
are waived in the event of repairs performed by the user
or incorrect operation.
Some problems may be caused by minor faults that you can fix yourself.
To do so, follow the instructions in the following table. If it is still not possible
to resolve the problem, contact customer service. Do not repair the pressure
cooker yourself.
Problem
4
The lid does
not close properly.
The lid cannot be
opened.
"E1" shows on the
display.
"E2" shows on the
display.
"E3" shows on the
display.
"E4" shows on the
display.
32
Possible cause
The silicone sealing
6
ring is not fitted
correctly.
The pressure has not
been fully released.
The float valve
has not dropped
down.
Sensor error
Short circuit of the
sensor
The pressure cooker is
overheated.
The pressure
regulator is not
working properly.
Solution
Reassemble the silicone sealing
ring correctly.
Allow the pressure to release
naturally, or turn the pressure
regulator
position.
Use a cocktail stick to push it
1
down, jiggle the lid and allow the
steam to escape.
Unplug the pressure cooker and
allow it to rest for 20 minutes
before using it again. Contact
after sales support if the problem
persists.
Unplug the pressure cooker and
allow it to rest for 20 minutes
before using it again. Contact
after sales support if the problem
persists.
Ensure there is enough food and
liquid inside the pot.
Ensure the pot is properly placed
inside the base unit.
Switch the pressure cooker off
and let it cool down for
20 minutes before using it again.
Contact after sales support if the
problem persists.
Contact after sales support for
repair. Do not repair the pressure
cooker yourself.
3
to the "Exhaust"