Grouw 18000 Manual De Instrucciones página 75

Use
Cold engine start
Place the chainsaw on the ground.
Engage chain brake.
Set on/off switch (14) to "I".
Pull choke (18) out.
Press primer (23) x 10 until
fuel is visible.
Pull recoil starter handle
until the engine attempts
to start, but no more than
5 times.
Press choke (18) in.
Pull recoil starter handle
until engine starts.
Allow engine to run for 30
seconds.
Disengage chain brake.
Squeeze and hold the
throttle and the safety
switch to start using the
product.
GB
75