Pre/Post Work Warnings; Maintenance Warnings - CAMPAGNOLA T-CAT Manual De Uso

• Avoid any accidental tool operating. When holding or carrying the tool, make sure that the ON/OFF button (10) is in
OFF position and the battery (16) has been removed.
• Remove any adjustment key before switching the tool on.
• While operating, when the chain (1) touches hard materials, it can cause sparks. If the work environment is poten-
tially explosive, sparks can cause fires or explosions.
2.3.2

Pre/post work warnings

• When it is not used for pruning, switch off the tool by means of the ON/OFF button (10), in order to avoid any use-
less battery (16) consumption.
• Always check that the safety devices are perfectly efficient.
• Carry the tool by keeping the bar (2) headed backwards, with the bar guard (15) inserted and the battery (16) re-
moved
• Follow the chain manufacturer's instructions as for the chain (1) sharpening and maintenance.
• Remove the battery (16) before carrying out any adjustment or routine or extraordinary maintenance operation.
• Use the tool only with the accessories indicated by the Manufacturer.
• Before any ordinary maintenance operations, read the use and maintenance manual carefully. For any mainte-
nance operation which is not indicated in this manual, please contact one of the Authorized Service Points.
• Keep this manual carefully and read it before any tool use.
• Do not touch the chain (1) or carry out maintenance operations while the motor is on.
• Keep all the stickers with the safety indications in perfect conditions.
• Do not use petrol, solvents or other caustic products to clean the tool.

Maintenance warnings

WARNING!
Before performing any maintenance operations or adjustments on the mechanical parts of the equipment, put
on heavy-duty work shoes, protective gloves and goggles.
Routine maintenance and repairs can be carried out only by an operator with the necessary physical and intellectual
•
qualifications, as defined by the employer.
• Special maintenance (such as disassembling the gear motor or the main board) and repairs can be carried out only
by a qualified mechanic.
• Before any maintenance or adjustment operations, disconnect the tool from its battery (16).
• Keep bystanders at least 2 meters away, when servicing or repairing the machine.
• Only qualified mechanics are authorised to inactivate the tool safety devices, if any, when special maintenance is
to be performed. It is their responsibility to safeguard the operators and the machine and to re-activate the safety
devices as soon as maintenance work has been completed.
• All maintenance procedures not dealt with in this manual are to be performed at CAMPAGNOLA Authorised Service
Points.
• When maintenance or repairs have been completed, the machine can be started again only if duly authorised by the
qualified mechanic. The service mechanic must make sure:
- work has been completed;
- the machine runs in a trouble-free manner;
- the safety devices are activated;
- no one is working on the machine.
Page. 26 Use and maintenance manual – Translation of
original Instruction.: 00, Date 30/08/2021