Agilent TwisTorr 305-ICQ Manual Del Usuario página 262

Technical Information
Win # Min Max 0 Value
401
402
404
406
407
503 0 31
724 0 30
725 Off
1
NOTE
2
3
Figure 88
A: No connection to pump
B: Pump over temperature
C: Controller over temperature
D: Vdc under voltage
E: Thermal pad over temperature
F: Vdc over voltage
G: Fault DRV8305
H: Too high load
I: Rotor locked
L: RFU/Not used (RFU=Reserved for Future Use)
M: Body HW over temperature
N: Run Up Time
262
1 Value Unit
-
-
-
-
-
-
min
On -
Automatic means that when the controller stops, the vent valve is opened with
a delay defined by window n. 126; when the controller starts, the vent valve is
immediately closed.
On command means that the vent valve is opened or closed by means of
window n. 122.
These commands remove the pump motor supply for a short time. If they are
used continuously, they can cause the pump stopping.
Window N. 206 Bit Description
Agilent TwisTorr 305-ICQ & 305-IC SF User Manual