Installing The Edge Guard; Product Overview - Toro Power Plex 51130 Manual Del Usuario

5

Installing the Edge Guard

Parts needed for this procedure:
1 Wire edge guard
Procedure
Slightly spread the ends of the wire edge guard apart
and then insert the ends into the holes in the trimmer
housing as shown in Figure 5.
Figure 5

Product Overview

Specifications
Weights
Mass of the machine without
the battery
Mass of the machine with
battery 88525
Mass of the machine with
battery 88526
Appropriate Temperature Ranges
Charge the battery at
Use products at
Store products at
Unplug the charger if
*Charging time will increase if you do not charge the
battery within this range.
Store the tool, battery pack and battery charger in an
enclosed clean, dry area.
g189882
10
3.2 kg (7.0 lb)
4.2 kg (9.2 lb)
4.8 kg (10.5 lb)
0°C (32°F) to 40°C (104°F)*
-15°C (5°F) to 60°C (140°F)
-15°C (5°F) to 60°C (140°F)
Below 0°C (32°F) or above
40°C (104°F)