Technical Data; Protecting The Environment - Stanley FatMax FME700 Manual De Instrucciones

Repairs
To assure product SAFETY and RELIABILITY, repairs,
maintenance and adjustment should be performed by
authorized service centers or other qualified service
organizations, always using identical replacement parts.
Lubrication
Closed-type, grease-sealed ball bearings are used throughout.
These bearings have sufficient lubrication packed in them at
the factory to last the life of the chop saw.
Accessories
Caution! The use of any other accessory not recommended
for use with this tool could be hazardous.
Use only high-strength Type 1 organic bonded wheels rated
4300 rpm or higher that comply with EN12413.
Recommended accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center.

Protecting the environment

Z
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Stanley Fat Max product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
z
Separate collection of used products and
packaging allows materials to be recycled and
used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Stanley Europe provides a facility for the collection and
recycling of Stanley Fat Max products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Stanley Europe office at the
address indicated in this manual. Alternatively, a list of
authorised Stanley Europe repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
(Original instructions)

Technical data

Voltage
Power Input
No-Load Speed
Max. Peripheral Speed Cutting Disc
Max. Disc Diameter
Disc Bore
Max Disc Thickness
Type Of Cutting Disc
Cross Cutting Capacity at 90
o
Circular
Square
Rectangular
Angular
Cross Cutting Capacity at 45
o
Circular
Square
Rectangular
Angular
Weight
L (Sound Pressure)
pA
Uncertainty (K)
L (Sound Power)
WA
Uncertainty (K)
Vibration a
h
Uncertainty (K)
ENGLISH
FME700
(Type1)
230
V
AC
W 2,300
min
3,800
-1
m/s 80
mm 355
mm 25.4
3
mm
Straight, non recessed
mm 125
mm 115
mm 115 x 130
mm 137 x 137
mm 115
mm 98 x 98
mm 105 x 95
mm 95 x 95
kg 18
FME700
(Type1)
92.5
dB(A)
dB(A) 3
105.5
dB(A)
dB(A) 3
m/s 6.5
2
m/s 1.5
2
9