Adjusting Volume; Reset Hardware - Iqua BHS-603 Guia Del Usuario

603.book Page 9 Friday, September 22, 2006 2:04 PM
EN

Adjusting volume

Press the Volume + button to increase the volume. Press Volume – button to decrease
volume.
Mute & un-mute
During an on-going a call, press and hold both Multifunction and Volume + buttons until you
hear a tone.
Switch between phone & headset
To transfer call from your headset to your phone or vice versa, press and hold both
Multifunction and Volume – buttons. You will hear a tone when the transfer is successful.
Erase paired devices
th
The BHS-603 can be paired to up to 8 devices. Once it is already paired to 8 devices, the 9
st
paired device will replace the 1 paired device. You can also erase the paired device list of
the headset in order to pair it with new devices. While the headset is powered on but not
connected with any Bluetooth device, press and hold the Volume + button for 5 seconds until
you hear a tone.

Reset hardware

In case the headset is jammed you may do hardware reset and restart the headset. Plug
charger to headset and at the same time press and hold the Volume + button. Release
Volume + button, the headset will be powered off.
9