3M PROTECTA CABLOC Manual Del Usuario página 10

8.0 LABELING, ID/LOT NUMBERS, MANUFACTURING DATES
The Cabloc Vertical Cable Safety System label (see Figure 10) must be securely attached and fully legible:
1. Installation date
2. Installed by
3. Contact Number
4. Maximum users per system
5. System Length
6. Minimum distance between climbers
7. Next service date
8. System serial number
9. All users must be fuly trained before climbing.
10. Systems that are used with and without top energy absorber and the acceptable cable for each confi guration.
11. Vertical Cable Safety System Sleeve models covered by this instruction.
The following Cabloc Detachable Cable Sleeve labels must be securely attached and fully legible:
Label in Figure 11, Model 6180200:
1. Model Number
2. Up Arrow
Label in Figure 12, Model 6180201
1. Model Number
2. Up Arrow
Label in Figure 13:
1. UP orientation of sleeve body.
2. Maximum (Max) user weight capacity of the Cable Sleeve and minimum (Min) user weight required for safe Cable Sleeve
operation.
3. Read user instructions before using the Cable Sleeve.
4. Applicable strandard, EN353-1:2014+A1:2017: Personal fall protection equipment — Guided type fall arresters including an
anchor line.
5. CE Marking, 1019 = VVUU, CE Production Quality Control.
Markings in Figure 14:
1. Batch number and date of manufacture.
10