Injectors Current Sheet; Fueltech Peak & Hold Upgrade To Pro Injector Driver; P&H Pro Injector Driver Configuration - FuelTech Peak and Hold PRO Manual Del Usuario

6.3 Injectors current sheet

Bosch 160lb/h
Bosch 160lb/h (2 injetores por canal)
Bosch 160lb/h (4 injetores por canal)
Siemens 220-225lb/h
Siemens 220-225lb/h (2 injetores por canal)
Precision 550lb/h
Moran and Billet Atomizer
FT Injector 320lb/h, 520lb/h and 720lb/h
6.4 FuelTech Peak & Hold upgrade to PRO Injector Driver
Due to a improved strategy of injector control, when upgrading from FuelTech's
Peak and Hold to the new PRO Injector Driver some fuel map tune will be
needed.
• Idle injection time has to be adjusted.
• If necessary, adjust injection time at the entire map.
7. P&H PRO Injector Driver Configuration
It is easy to configure the P&H PRO Injector Driver using FTManager software.
Go to the "External Devices" section at the Home tab (1).
Click at P&H PRO icon and select either "Module A" or "Module B" if using
two drivers (2).
Peak and Hold PRO Injector Driver
Brand / Model
PEAK
current
2A
4A
8A
4A
8A
8A
8A
8A
1
2
HOLD
current
0,5A
1A
2A
1A
2A
EN
2A
2A
2A
9