Iqua BHS-701 Guia Del Usuario página 8

BHS-701_Headset_US_UG.fm Page 6 Monday, August 14, 2006 1:02 PM
Pairing the BHS-701 and your mobile phone
Pairing is the process of linking BHS-701 with your compatible Bluetooth mobile phone*. After
this process is completed, you can use the BHS-701 with the paired mobile phone. If you want
to use the BHS-701 with another mobile phone, you must repeat the pairing process again.
Even though BHS-701 can be paired with up to 8 compatible phones it can only be connected
to one phone at a time. Once it is paired with 8 phones, the 9th paired device will replace the
1st paired device.
First time usage
When the BHS-701 is powered on for the very first time, it will enter pairing mode automatically
(blue and red lights flash alternately). Please follow the steps 3-6 below to pair your headset
with your phone.
Later on usage
After powered on, BHS-701 will automatically reconnect to the last-connected phone.
If the connection is failed due to phone not found, the headset will automatically enter into
pairing mode (blue and red lights flash alternately). Please follow the steps 3-6 below. If the
headset is not paired with any phone in 2 min. it will go to "powered on but no Bluetooth
connection" -mode (blue light flashes continuously). You can switch the headset off and switch
it on again.
* For latest compatibility information please visit www.iqua.com
6