Horizon Global 76471 Instrucciones De Instalación página 6

2f.) Carefully disconnect all wiring harnesses from fascia and safely set fascia aside.
3. Remove bumper beam – Using a 15mm socket with extension, remove (4) M10 bolts and (4) M10 flange nuts. Gently lower exhaust hanger bracket before fully
removing bumper beam. Return bumper beam to owner and set bolts and nuts aside for later use. See Figure 1.
Bumper beam
End panel
Existing M10 Nuts
(4) Places
Existing M10 Bolts
(4) Places
Figure 1
Exhaust Hanger Bracket
©2021 Horizon Global™ Corp - Printed in Mexico Sheet 6 of 24 76471NP 5-6-21 Rev. A