Horizon Global 76471 Instrucciones De Instalación página 5

2b.) Using a T20 star driver, remove (2) screws from top fascia area near trunk
weatherstrip.
2d.) NOTE: Disconnect light on wheel well trim prior to partially removing,
both sides. Using a plastic trim tool, partially remove the fascia by gently
pulling rearward while releasing the clips of the wheel well trim. Only
remove as far as shown in Figure 2.
Figure 2
©2021 Horizon Global™ Corp - Printed in Mexico
2c.) On driver side, using a T15 star driver remove (3) screws from rear side of
wheel well trim. Repeat for passenger side. Set fasteners aside to be
reinstalled.
2e.) Using a 7mm socket, pulling back the wheel well trim, remove (1) screw
from both sides. See Figure 2
Figure 2
Sheet 5 of 24 76471NP 5-6-21 Rev. A