Storage - Prebena 3X-CNW50 Manual De Instrucciones Original

PLEASE NOTE
Bumps or impacts may damage the fastener driving tool.

Do not drop the fastener driving tool.

Protect the fastener driving tool against bumping into obstacles.

Carry the fastener driving tool by the handle with the tool tip pointing
at the floor.

Do not reconnect the compressed air supply until you have reached
the new operating location.
Transport over long distances
The following distances are considered "long distances" for transporting
the fastener driving tool:

Distances longer than 10 m,

Distances that lead over an uncertain subsurface and

Distances that must be covered in an unusual body position.
To be able to transport the fastener driving tool over long distances,
follow these steps:

Pack the fastener driving tool in the transport case included
with delivery.

Carry the transport case by the handle to the desired operating
location.

Always set the transport case down horizontally with the cover side
facing up.

Storage


Oil all the metal parts of the fastener driving tool with a thin film
of PREBENA special nailer oil.

Pack the fastener driving tool in the transport case.

Store the fastener driving tool at room temperature in a dry
and dust-free place.
Transporting and storing the fastener driving
tool
35