Descargar Imprimir esta página

SPALDING 184-0810-4 Manual De Instrucciones página 43

Publicidad

NET INSTALLATION / INSTALLATION DU FILET / ANBRINGUNG DES NETZES / INSTALACIÓN DE LA RED
9.
Install net (43). / Installez le filet (43). / Das Netz (43) anbringen. / Instale la red (43).
OUTSIDE VIEW / VUE EXTÉRIEURE / AUSSENANSICHT / VISTA EXTERNA
A.
C.
10.
Apply Height Adjustment and Moving Label (33) to front of pole,
where it is clearly visible.
Apposez l'étiquette de réglage de la hauteur et de déplacement
(33) sur l'avant du poteau, à un endroit bien visible.
Den Höheneinstell- und Transportaufkleber (33) gut sichtbar an
der Vorderseite der Stange anbringen.
Aplique la etiqueta de ajuste de la altura y movimiento (33) en la
parte frontal del poste, donde sea claramente visible.
34
34
HEIGHT ADJUSTMENT
Rotate crank handle to raise and
lower backboard.
Do not over crank handle beyond the
manufactured height indicator range
of 7-1/2 - 10 feet.
Damage may be caused to the
screw jack's internal adjustment
mechanism if adjusted over 10 or
B
under 7-1/2 feet.
MOVING SYSTEM
1.
Adjust basketball backboard
height to lowest position.
1
2.
While holding pole, rotate
basketball system forward
until wheels engage with
ground.
3.
Move basketball system to
2
desired location.
3
4.
Carefully rotate basketball
system upright.
4
5. Check system for stability.
4" Wide
5-1/2" Tall
B.
D.
33
A
568091
11/07
43
43
43

Publicidad

loading