Descargar Imprimir esta página

Chicco 06627 Manual Del Usuario página 58

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 98
1.2 Child unit (primarily in image and
sound transmitter mode)
Model 06627
1. Power via 100-240 V~ 50/60 Hz /6.5
V
, 550 mA switching mains
adapter or via four 1.5V AAA/LR6 alka-
line batteries (not included)
2. On/off button for Baby Monitor or
Temperature Measuring mode
3. Night light on/off button
4. Night light
5. Video camera
6. Microphone
7. Infrared lighting system (8 LEDs) to
allow viewing of the child in the dark
8. Light-sensitive sensor
9. Power and link indicator light:
(a) Steady green: linked with parent
unit
(b) Flashing green: absence or loss of
link with parent unit
(c) OFF: child unit off or on in Music
mode or Temperature Measuring
mode
10. Alkaline battery compartment
closing panel
11. Child unit power connector
12. Alkaline battery status indicator
light:
(a) Flashing red: alkaline batteries al-
most flat
(b) OFF: alkaline batteries charged or
operation via mains adapter (1)
13. Audio input
14. Temperature sensor
15. Lullaby on/off/selection button
16. Child unit loudspeaker + (16a) and
- (16b) volume adjustment buttons
17. Display
18. Audio cable (supplied)
19. Loudspeaker for the reproduction
of sounds coming from the parent unit
in Baby Monitor mode or music in Mu-
sic mode.
1.3 Parent unit (primarily in image
and sound receiver mode)
Model 06627
1. Power via supplied rechargeable 3.7
V 1800 mAh lithium-ion battery or via
100-240 V ~ 50/60 Hz /6.5V 550 mA
switching mains adapter
2. On/off button for Baby Monitor
mode
3. Lit level indicator bar for sounds
emitted by the child
4. 3" colour touchscreen display to
see a real-time image of the child and
manage the internal menu
5. Parent unit loudspeaker + (5a) and -
(5b) volume adjustment buttons
6. Built-in speaker to reproduce the
sounds emitted by the child in Baby
Monitor mode and to show the videos
recorded in Gallery mode.
This performs the following additional
functions at the same time:
a) Absence or loss of link between
child and parent unit signal function:
approx. 10 seconds after the power
and link indicator light starts to flash
green, you will hear 2 consecutive
beeps per second. As soon as the link
with the child unit is restored, the
signal switches off and the power and
link indicator light will light up steady
green.
b) Rechargeable lithium-ion battery
status almost flat signal function: you
will hear 1 beep per second and the
rechargeable battery status indicator
light will start to flash red.
10
Wh
lith
sw
bat
ste
c) R
7. V
8. P
(a)
(b)
link
(c)
ler
9.
sta
(a)
alm
(B
cha
(c)
or
out
10.
me
11.
12.
com
13.
lith
50
ma
14.
abl
15.
16.
17.
18.
the
19.

Publicidad

loading