Chicco 06627 Manual Del Usuario página 84

heat or fire. Do not expose to direct
sunlight.
- Do not expose lithium batteries to
mechanical shock. In case of acciden-
tal falls, always check the status of the
container and contacts before pro-
ceeding with re-use. Do not use if the
lithium battery is damaged as a result
of the fall.
- In the case of liquid leakage from the
battery, be careful to avoid contact
with skin and eyes with the liquid. If
contact occurs, wash affected areas
with plenty of water and seek medi-
cal advice.
- Do not use any charger not specifi-
cally provided for use with the equip-
ment.
- Observe the markings (+) and (-) on
the lithium battery and on the product
to ensure proper insertion and use.
- Do not use a lithium battery differ-
ent from that supplied to power the
appliance.
- Keep lithium batteries away from the
reach of children.
- This appliance has been designed to
prevent and inhibit the incorrect inser-
tion of the lithium battery: always ob-
serve the relative polarity markings on
the product and on the lithium battery
to ensure proper use.
- Do not use a model of battery that
is different than that stated in this
instruction manual in the appliance.
The battery purchase reference code
is CODE 20256600100.
- Only recharge the lithium bat-
tery during use and only using the
mains adapter supplied
20256600200). Do not recharge the
lithium battery using an external bat-
tery charger. Follow the instructions
in this manual to recharge the lithium
battery.
- Keep the battery and the battery
contacts clean and dry. In the event
that the contacts become dirty, clean
the terminals with a soft, dry cloth.
Do not use abrasives, chemicals or
solvents to clean the battery and its
contacts.
- Lithium batteries require charging
prior to use. Always refer to the in-
structions for correct charging proce-
dures.
- Do not keep charging the lithium
battery when not in use.
- Always remove the lithium battery
from the product when not in use.
- Dispose of properly according to the
information in this manual.
5.1 Installing alkaline batteries (not
included) in the child unit (primar-
ily in image and sound transmitter
mode)
5.1 Installing alkaline batteries (not
included) in the child unit (primarily
in image and sound transmitter mode)
Remove the alkaline battery compart-
ment closing panel (10) placing your
finger near the arrow and gently pull-
ing the panel upward (fig. 1).
Insert four 1.5 V alkaline AA/LR6 bat-
teries, respecting the proper insertion
polarity as indicated in the battery
compartment.
Reposition the alkaline battery com-
partment closing panel (10) first in-
(CODE serting the lower panel hooks in their
battery compartment housing and
36