Chicco 06627 Manual Del Usuario página 66

The power and link indicator light (8)
will begin to flash green and the dis-
play (4), after briefly displaying the
Chicco logo, will show the
indicate that the parent unit is search-
ing for a link with the child unit. Once
a link has been established between
the 2 units, the power and link indi-
cator light (8) will light up a steady
green, the icon will appear on the
display and the image detected in real
time by the video camera (5) on the
child unit will be shown.
It will be possible to take photos and
record videos of your child's best mo-
ments, manage the contact list, set
the current date and time, set and ac-
tivate the 5 reminders available, acti-
vate the zoom and the voice activation
function and monitor the temperature
in the child's room.
Keep the button (2) pressed for 2 sec-
onds until the power and link indicator
light (8) and the parent unit (primar-
ily in image and sound receiver mode)
switch off.
A prolonged beep will be heard when
switching the parent unit on and off in
Baby Monitor mode.
Switching the parent unit on/off in
Gallery mode
Press the on/off button (11) for about
2 seconds to turn the parent unit on in
Gallery mode.
After briefly showing the Chicco logo,
the display (4) will show the toolbar
and the main menu for this mode.
It will be possible to manage the con-
tact list, set and activate the 5 remind-
ers available and look at the photos
and videos saved in Baby Monitor
mode.
CAUTION: in Gallery mode, it is not
icon to possible to see the image of the child
in real time as there is no link between
the parent unit and the child unit.
Holding down the button (11) for 2
seconds will switch off the parent unit.
A short beep will be heard when
switching the parent unit on and off in
Gallery mode.
+ - volume adjustment of the parent
unit loudspeaker
The + (5a) and – (5b) volume adjust-
ment buttons (6) adjust the volume
of sounds emitted by the child unit in
Baby Monitor mode, while in Gallery
mode, they adjust the volume of the
videos recorded.
Press + (5a) and – (5b) to adjust par-
ent unit loudspeaker (6) volume and
select the desired level.
The unit offers 10 volume setting lev-
els. The factory set level is 5.
Press the "+" button (5a) once to in-
crease the volume by one level.
Press the "-" (5b) button once to de-
crease the volume by one level.
The change in the volume level will be
shown on the display (4)
The appliance stores the volume
level selected during previous use in
its memory, even after it has been
switched off and switched back on.
Note: The volume adjustment icon in-
cludes 5 bars: each bar lights up after
2 presses of the + (5a)/- (5b) button.
A beep will be heard each time the
volume is increased or decreased by a
level. A double beep will be heard each
18
tim
is r
Ad
un
It i
(4)
ces
uni
nes
For
par
Co
It i
the
me
Mo
For
me
Par
Tal
The
for
chi
Mo
but
uni
fun
sou
ent
CA
tio
ent
uni
sou
CA
(12
sam
as