Chicco 06627 Manual Del Usuario página 65

in sic mode or in Temperature Measuring
mode.
s a •The alkaline battery status indicator
pli- light (12) supplies 2 different pieces of
sed information:
in -Flashing red: alkaline batteries al-
17) most flat.
om -Off: alkaline batteries charged or op-
eration via mains adapter (1).
m-
er- Night Vision
se, In case of darkness or a decrease in the
ect brightness of the room where the child
m. unit is located, the light-sensitive sen-
the sor (8) will automatically activate the
infrared lighting system (7) to allow
the viewing of the child even in the dark.
ing Caution: when night vision is active,
the parent unit display (4) image col-
ours will be altered and, in the event
of darkness, the images will appear in
(9) black and white. This is normal.
ma-
Digital Zoom Adjustment
in It is possible to enlarge the image
on- of the child by activating the digital
zoom on the child unit video camera
ink (5). The zoom is activated from the
tor main menu on the parent unit in Baby
Monitor mode. When the zoom is ac-
tive, the
ent (4) on the parent unit.
(9) For details, see paragraph 3.2.3.
2.2 Parent unit (primarily in image
hed and sound receiver mode)
ink 2.2.1 Power and recharging
di- Power via supplied rechargeable 3.7
the V 800 mAh lithium-ion battery (13)
l a or via 100-240 V~, 50/60 Hz /6.5 V
Mu-
icon appears on the display
, 550 mA mains adapter (1).
CAUTION: the rechargeable batter-
ies should only be charged via the
supplied mains adapter (1) and this
can take place both if the parent unit
is switched on and if the parent unit
is off. If powering using the mains
adapter (1) or charging the recharge-
able lithium-ion battery:
- check that the mains voltage cor-
responds to that shown on the rating
plate of the adapters;
- insert the mains adapter jack (1) in
the power connector (14) on the side
of the unit;
- insert the mains adapter plug in an
easily accessible power socket.
Attention
- The mains adapter cord (1) may con-
stitute a risk of strangulation, keep out
of reach of children.
- Periodically inspect mains adapters
(1). If the power cord or plastic parts
show signs of damage, do not use
them and contact a qualified techni-
cian.
- Do not leave mains adapters (1)
plugged into the outlet when appli-
ances are not in use and/or not con-
nected to the mains adapters (1).
2.2.2 Modes of use - Switching on
and adjustment.
Switching the parent unit (primarily
in image and sound receiver mode)
on/off in Baby Monitor mode.
Press the on/off button (2) for about 2
seconds. The parent unit (primarily in
image and sound receiver mode) will
switch on in Baby Monitor mode.
17