Publicidad
Idiomas disponibles
Idiomas disponibles
gently pushing the panel downward
at-
(fig. 2).
ons
um
5.2 Replacing alkaline batteries (not
included) in the child unit (primar-
ery
ily in image and sound transmitter
ent
mode)
ean
Remove the alkaline battery compart-
th.
ment closing panel (10) placing your
or
finger near the arrow and gently pull-
its
ing the panel upward (fig. 3).
Remove the four 1.5V alkaline AA/LR6
ing
batteries and replace them with four
in-
similar batteries, taking care to re-
ce-
spect the proper insertion polarity as
indicated in the battery compartment.
um
Reposition the alkaline battery com-
partment closing panel (10) first in-
ery
serting the lower panel hooks in their
battery compartment housing and
the
gently pushing the panel downward
(fig. 4).
not
5.3 Installing the lithium-ion battery
ar-
(included) with the parent unit (pri-
ter
marily in receiver mode)
Upon purchase, the 3.7 V 1800 mAh
not
rechargeable lithium-ion battery (13)
rily
in the parent unit is kept separately in
de)
the product packaging.
art-
Carefully remove the lithium-ion bat-
our
tery from its packaging.
ull-
Remove the rechargeable battery
compartment closing panel (10), gen-
at-
tly pushing it outwards following the
ion
direction of the arrow (Fig. 5).
ery
Insert the lithium-ion battery (13), re-
specting the proper insertion polarity
m-
as indicated in the battery compart-
in-
ment.
heir
Reposition the rechargeable battery
and
compartment closing panel (13), in-
serting the hooks in their battery com-
partment housing and gently pushing
in the opposite direction to the one
shown by the arrow (fig. 6).
5.4 Replacing the lithium-ion bat-
tery (included) with the parent unit
(primarily in receiver mode)
If the duration of the rechargeable
lithium-ion battery is reduced exces-
sively, this means that it has run out
and therefore must be replaced (this
is to be considered normal because
rechargeable batteries run out over
time).
Remove the rechargeable battery
compartment closing panel (10), gen-
tly pushing it outwards following the
direction of the arrow (fig. 7).
Remove the flat rechargeable bat-
tery (13) and replace with another
rechargeable 3.7V 1800 mAh battery
that is identical to the one supplied
with the product (code 20256600100
to be requested directly from Artsana
S.p.A.) taking care to place them with
the correct insertion polarity indicated
on the battery compartment.
Reposition the rechargeable battery
compartment closing panel (10), in-
serting the hooks in their battery com-
partment housing and gently pushing
in the opposite direction to the one
shown by the arrow (fig. 8).
37
Publicidad
