Tabla de contenido
Publicidad
Scanning of internal an external components
Detector modules
After scanning process and uploading of the programming out of the flash memory all recognised
components will be displayed in a list.
Example:
Internal Modules
1. Loop card HOCHIKI ESP
2. Loop card Apollo XP
3. Conventional detector card
4. Input-/output module
Cancel
Number of mounted detector modules correctly recognised?
By pressing the „Details" key F3 the addresses of the modules can be checked.
Example:
Internal Modules
>01 Loop card HOCHIKI ESP
02 Conventional detector card
03 -
04 -
05 -
06 -
Cancel
Addresses of the mounted detector modules correctly set?
Serial devices
Afterwards the serial interfaces will be scanned for connected components. The result with the
number of recognized devices will be noticed in the module list.
.
Example:
Internal Modules
5. Network interface card
6. Modem
7. FBC/LCD panel
8. Modbus device
Cancel
Number of installed serial devices correctly recognized?
NSC Sicherheitstechnik GmbH
Eckendorfer Str. 125 c
33609 Bielefeld
:
01
:
00
:
01
:
00↓
Details
1/09
Details
:
00↑
:
00
:
04
:
01
Details
63/71
o.k. fault
o.k. fault
o.k. fault
10.10.2012
Manual Solution F1- Español
Version S040A06.03
Publicidad
Tabla de contenido
