Receiving And Transmitting Configuration Data; Receiving Configuration Data; Transmitting Configuration Data; Saving And Opening Configuration Files - Dräger REGARD 3000 Instrucciones De Uso

11.5

Receiving and transmitting configuration data

11.5.1

Receiving configuration data

Requirements:
– System is connected to the PC.
– Configuration interface is configured.
1. In the menu bar, select Configuration > Receive configuration....
2. Follow the directions on the display.
✓ The current system configuration is loaded.
Observe the following information: "Configuration role", page 147.
11.5.2

Transmitting configuration data

Requirements:
– System is connected to the PC.
– Configuration interface is configured.
1. In the menu bar, select Configuration > Send configuration....
2. Follow the directions on the display.
✓ The current system configuration is transmitted.
Observe the following information: "Configuration role", page 147.
11.6

Saving and opening configuration files

11.6.1

Saving configuration files

● In the menu bar, select File > Save.
Once the file has initially been saved and a dialogue window is displayed:
● Select a storage location in the dialogue window and give the file a name.
11.6.2

Saving a copy of a configuration file

1. In the menu bar, select File > Save As....
 A dialogue window is displayed.
2. Select a storage location in the dialogue window and give the file a name. Then
select
11.6.3

Opening configuration files

1. In the menu bar, select File > Open....
 A dialogue window is displayed.
2. Select the desired file and select
11.7

Setting and changing configurations

11.7.1

Setting parameters

1. In the System view [Docking Station area, select [module] > [Port].
|
Instructions for use
REGARD 3000
Then select .
.
REGARD configuration software
.
|
en
177