Dräger REGARD 3000 Instrucciones De Uso página 180

|
en
Interlinking with REGARD 7000
Please note the following points:
– If the REGARD 3000 is interlinked with a REGARD 7000, configuration can only
take place using the REGARD 7000 with a REGARD 7000 Dashboard or with
the REGARD Configuration Software in conjunction with a REGARD 7000 PC-
Software Key.
– The local alarm signal via the horn, light ring, main relay and pre-alarm relay
always relates exclusively to the signals of the REGARD 3000 local input
module.
– The local SSR and SFR always relate exclusively to the local Docking Station
and local modules.
– The Display Unit only displays the local channels and alarms of the
REGARD 3000.
– The local inputs for acknowledging and maintaining the REGARD 3000 only
have an influence on the local channels.
– The REGARD 3000 can respond to an alarm from the REGARD 7000 (e.g. relay
can trigger). But, the alarm from the REGARD 7000 is not displayed on the
REGARD 3000.
– The REGARD 3000 modules can communicate with the REGARD 7000
modules without restriction.
– A max. of 1536 Ports are available for the overall system in connection with a
REGARD 7000.
180
REGARD 7000
i 8:53 AM
2
Process values Status
0 0
i
CH4 %LEL
20.9
i
O2 %Vol
i
i
AB
REGARD 7000
i
2 8:53 AM
Process values Status 2
0 Process values
0 i
CH4 %LEL
20.9
i
O2 %Vol
i
i
AB
8:53 AM
Status
0 0
CH4 %LEL i
20.9 i
O2 %Vol
i
i
AB
Instructions for use
REGARD 7000
i 8:53 AM
2
Process values Status
0 0
i
CH4 %LEL
20.9
i
O2 %Vol
i
i
AB
A A X X i 8:53 AM
0 0 0 0 0 0 0 0 2
Tag Tag Process values Status
PIR7000 PIR7000 0 0
CH4 %LEL i
4-20H 4-20H
Polytron 7000 O2 Polytron 7000 O2 20.9 i
4-20H 4-20H O2 %Vol
Ack Switch Ack Switch
i
Overrange Ack Switch Overrange Ack Switch
i
Alarm Switch Alarm Switch
AB
Warning Switch Warning Switch
Fault Switch Fault Switch
Inhibit Switch Inhibit Switch
|
REGARD 3000