Emerson ION ECO CF5300BS00 El Manual Del Propietario página 19

7. Optional Installation of No-Light Cover
7.5
Place the No-Light Cover into the opening of the LED
Light Fixture Assembly, aligning the three Flat Areas on
the top edge of the Shade Assembly with the three raised
Dimples on the LED Light Fixture Assembly
Turn the No-Light Cover clockwise until it stops
(Figure 30).
NOTE: Periodically check that the No-Light Cover is
seated fully clockwise in the LED Light Fixture
Assembly.
DIMPLES
FLAT AREA
NO-LIGHT COVER
ROTATE THE NO-LIGHT COVER CLOCKWISE TO
ENGAGE TO THE LED LIGHT FIXTURE ASSEMBLY DIMPLES
Figure 30
19
(Continued)