Edirol STUDIOCANVAS SD-80 Guía De Iniciación página 11

fig.2-3_30
9
In the dialog box that appears, input the
following into the "Open" field, and
click [OK].
D:\Driver\USB_XP2K\SETUPINF.EXE
* The drive name "D:" may be different for
your system. Specify the drive name of your CD-ROM drive.
fig.2-4_30
10
The SetupInf dialog box will appear.
You are now ready to install the driver.
11
Use the USB cable to connect the SD-80 to your computer.
1. With the power switch turned OFF, connect the AC cable to the SD-80.
2. Connect the AC cable to an electrical outlet.
3. Use the USB cable to connect the SD-80 to your computer.
12
Set the SD-80's power switch to the ON position.
Near the task bar, your computer will indicate "Found New Hardware".
Please wait.
fig.2-6
13
The Found New Hardware
Wizard will appear.
Make sure that the screen
indicates "EDIROL SD-80", select
"Install from a list or specific
location (Advanced)", and click
[Next].
Installing & Setting Up the Driver (Windows)
In this manual, the location
of folders and files is given
in terms of the file path,
using \ as the delimiter.
For example,
USB_XP2K\SETUPINF.
EXE indicates the
SETUPINF.EXE file found
in the USB_XP2K folder.
If "Do you want to re-
install the driver after
uninstalling the driver
that is already
installed?" appears, click
[Yes].
Once the connections have
been completed, turn on
power to your various
devices in the order
specified. By turning on
devices in the wrong
order, you risk causing
malfunction and/or
damage to speakers and
other devices.
Always make sure to have
the volume level turned
down before switching on
power. Even with the
volume all the way down,
you may still hear some
sound when the power is
switched on, but this is
normal, and does not
indicate a malfunction.
11