Edirol STUDIOCANVAS SD-80 Guía De Iniciación página 16

Installing & Setting Up the Driver (Windows)
7
Exit all currently running software (applications).
Also close any open windows. If you are using virus checking or similar
software, be sure to exit it as well.
8
Prepare the CD-ROM.
Insert the CD-ROM into the CD-ROM drive of your computer.
9
Open the "Run..." dialog box.
Click the Windows Start button. From the menu that appears, select
"Run...".
fig.2-14_40
10
In the dialog box that appears,
input the following into the
"Open" field, and click [OK].
D:\Driver\USB_XP2K\SETUPINF.EXE
* The drive name "D:" may be different for your system. Specify the drive name of your
CD-ROM drive.
fig.2-15_40
11
The SetupInf dialog box will
appear.
You are now ready to install the
driver.
12
Use the USB cable to connect the SD-80 to your computer.
1. With the power switch turned OFF, connect the AC cable to the SD-80.
2. Connect the AC cable to an electrical outlet.
3. Use the USB cable to connect the SD-80 to your computer.
16
In this manual, the location
of folders and files is given
in terms of the file path,
using \ as the delimiter.
For example,
USB_XP2K\SETUPINF.
EXE indicates the
SETUPINF.EXE file found
in the USB_XP2K folder.
If a message of "The
driver is already
installed" appears, you
can connect the SD-80 to
your computer and use it.
Once the connections have
been completed, turn on
power to your various
devices in the order
specified. By turning on
devices in the wrong
order, you risk causing
malfunction and/or
damage to speakers and
other devices.
Always make sure to have
the volume level turned
down before switching on
power. Even with the
volume all the way down,
you may still hear some
sound when the power is
switched on, but this is
normal, and does not
indicate a malfunction.