Edirol STUDIOCANVAS SD-80 Guía De Iniciación página 15

Windows 2000 users
1
With the SD-80 disconnected, start up Windows.
Disconnect all USB cables except for a USB keyboard and USB mouse (if
used).
2
Log on to Windows as a user with administrative privileges (such as
Administrator).
3
Open the System Properties dialog box.
Click the Windows Start button, and from the menu that appears, select
Settings | Control Panel. In Control Panel, double-click the System icon.
fig.2-12
4
Open the Driver Signing
Options dialog box.
Click the Hardware tab, and then
click [Driver Signing].
fig.2-13_50
5
Make sure that "File signature
verification" is set to "Ignore".
If it is set to "Ignore", simply click
[OK].
If it is not set to "Ignore", make a
note of the current setting
("Warn" or "Block"). Then change
the setting to "Ignore" and click
[OK].
6
Close the System Properties dialog box.
Click [OK].
Installing & Setting Up the Driver (Windows)
If you have already
connected the SD-80 to
your computer but the
"Add New Hardware
Wizard" appears, refer to
"You attempted to install
using the above
procedure, but were not
able to" in the
Troubleshooting section
of the Readme_e file
included in the
Driver\USB_XP2K folder
on the CD-ROM.
If you changed the "File
signature verification"
setting in step 5, restore
the original setting after
Windows restarts. (->If
you changed "File
signature verification"
(p. 18))
15