Display; De-Interlace - Avtech IVS Manual De Instrucciones

5.5.6 DISPLAY

CAMERA

DE-INTERLACE

DETECTION FULL SCREEN DURATION
ALERT QUAD SCREEN DURATION
NETWORK DWELL SCREEN DURATION
SNTP DISPLAY COVERT
DISPLAY HDD DISPLAY MODE
RECORD DISPLAY OUTPUT PATH
REMOTE ALPHA BLENDING
DCCS
IVS
NOTIFY
EXIT
1) DE-INTERLACE
Select to enable or disable the de-interlace function (ON / OFF).
Note: If you set the recording image size as "FRAME", please TURN ON de-interlace function.
If you set the recording image size as "CIF", please TURN OFF the de-interlace function.
2) FULL SCREEN DURATION
Select the full screen dwell duration time in second (03 / 05 / 10 / 15).
3) QUAD SCREEN DURATION
Select the quad screen dwell duration time in second (03 / 05 / 10 / 15).
4) DWELL SCREEN DURATION
Select the duration time in second for the CALL monitor function (03 / 05 / 10 / 15).
5) DISPLAY COVERT
Select "ON" or "OFF" to display or hide the wording "COV." When covert recording is activated in
"CAMERA".
6) HDD DISPLAY MODE
Select "SIZE" to show the remaining HDD capacity for recording in GB, or "TIME" to show the remaining
recording time.
7) DISPLAY OUTPUT PATH
The default video output setting is "AUTO", meaning the DVR will automatically detect the video output
source. When a CRT monitor and LCD monitor are both connected, the default video output is via the
connected LCD monitor.
Select "VGA" to fix the video output via the connected LCD monitor, or "COMPOSITE" to fix the video output
via the connected CRT monitor.
When the change is made, the DVR will then reboot for the change to take effect.
8) ALPHA BLENDING
Click to manually adjust the transparent level of the main menu.
ADVANCE CONFIG
(For Selected Models Only)
(For Selected Models Only)
(For Selected Models Only)
25
OFF
03
03
03
ON
HDD SIZE
AUTO
200
MAIN MENU