Record - Avtech IVS Manual De Instrucciones

5.5.7 RECORD

Note: Please DO NOT change the date or time of your DVR after the recording function is activated.
Otherwise, the recorded data will be disordered and you will not be able to find the recorded file
to backup by time search. If users change the date or time accidentally when the recording
function is activated, it's recommended to clear all HDD data, and start recording again.
CAMERA MANUAL RECORD ENABLE
DETECTION EVENT RECORD ENABLE
ALERT TIMER RECORD ENABLE
NETWORK EVENT RECORD IPS
SNTP TIMER RECORD IPS
DISPLAY PRE-ALARM RECORD
RECORD OVERWRITE
REMOTE EVENT RECORD ALL CHANNEL
DCCS KEEP DATA LIMIT (DAYS)
IVS
NOTIFY
EXIT
1) MANUAL RECORD ENABLE
Set the manual recording function on / off.
2) EVENT RECORD ENABLE
Set the event recording function on / off.
3) TIMER RECORD ENABLE
Set the timer recording function on / off.
4) EVENT RECORD IPS
Select the images per second for EVENT RECORD (Recording that is triggered by alarm or motion).
5) TIMER RECORD IPS
Select the images per second for TIMER RECORD (Recording that is activated according to the scheduled
time).
6) PRE-ALARM RECORD
Select to enable or disable the pre-alarm function (ON / OFF).
When pre-alarm and event recording functions are both activated, the DVR will record 8MB data before an
alarm / motion event is triggered.
7) OVERWRITE
Select "ON" to overwrite previous recorded data in your HDD when the HDD is full. When this function is on
and the HDD is full, the DVR will clear 8GB data from the oldest for continuous recording without notice.
8) EVENT RECORD ALL CHANNEL
Select to record all channels (ON) or record the channel with an event only (OFF) for any event.
9) KEEP DATA LIMITS (DAYS)
Assign the maximum recording days from 01 to 31 after which all the recorded data will be removed, or
select "OFF" to disable this function.
ADVANCE CONFIG
ON
ON
ON
120
120
ON
ON
OFF
OFF
26
MAIN MENU