Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
3)
DISPLAY LINE
Select to display the detection line for IVS on the screen or not.
4)
SENSITIVITY
Set the sensitivity for IVS from 00 ~ 15. The larger the value, the more sensitive the IVS will be.
5)
RESET COUNT
Click "SUBMIT" to reset the flow counting number to 0 when the IVS mode is set to "FLOW COUNTING" and
activated.
6)
VIRTUAL FENCE AREA
Click "SETUP" to draw the detection line for IVS, and set the detection direction from left to right, or right to
left. This area setting is the detection base for IVS MODE.
7)
SCENE CHANGE
Select "ON" to trigger a motion event when the camera is sensed to be moved and the camera scene is
changed. At the same time, the icon "
"
"
8)
SCENE CHANGE SENSITIVITY
Set the detection sensitivity for "SCENE CHANGE" to "HIGH", "MIDDLE" or "LOW".
IVS APPLICATION
F
F
L
L
O
O
W
W
C
C
O
O
U
U
N
N
T
T
Step1: Go to "VIRTUAL FENCE AREA" to draw a detection line with your mouse, and decide the
detection direction by selecting "REVERSE".
Step2:Finish the IVS setting and return to the live view. The IVS icon "
Click it to show the flow counting panel as follows.
When anyone walks across the detection line, the system will determine his movement is in or out,
and add one count to the corresponding channel on the flow counting panel.
IN
People coming from the opposite direction to the arrow mark.
OUT
People coming from the same direction as the arrow mark.
" will be also shown on the screen in addition to the motion icon
I
I
N
N
G
G
29
MAIN MENU
" will be shown on the status bar.
Publicidad
Capítulos
Tabla de contenido
