Ivs - Avtech IVS Manual De Instrucciones

result will display in "CONNECTION".
2) MENU
Click "SETUP" to configure the connected zoom lens control camera.
Different zoom lens control cameras might have different parameter settings. For details, please refer to their
own user manuals.
Note: While configuring the camera parameters, the DVR will switch to the corresponding channel, and
you can simultaneously preview the effects for the settings.
3) DEVICE
Here shows the model number of the camera.
4) CONNECTION
Here shows the examining result for DCCS signal transmission between the DVR and camera. The
message is as follows:
MESSAGE SHOWN
CHECKING
OK
FAIL

5.5.10 IVS

IVS, Intelligent Video Surveillance, is the advanced application for motion detection, but more precise and smarter.
It can be applied to different situations with one of the following three modes: FLOW COUNTING, VIRTUAL
FENCE, and ONE WAY PASS.
When anyone crosses the detection line (virtual fence), the recording will be on.
Note: Four camera channels are supported for this function. For 16CH and 8CH models, users are
allowed to select four camera channels randomly to use this function; for 4CH models, all the four
camera channels are supported.
CANERA IVS1 IVS2 IVS3 IVS4
DETECTION CAMERA
ALERT IVS MODE
NETWORK DISPLAY LINE
SNTP SENSITIVITY
DISPLAY RESET COUNT
RECORD VIRTUAL FENCE AREA
REMOTE SCENE CHANGE
DCCS SCENE CHANGE SENSITIVITY
IVS
NOTIFY
EXIT
1) CAMERA
(For 16CH & 8CH models only)
Select the camera channel that you want to use the IVS function.
2) IVS MODE
Select one of the following three modes depending on your environment:
MODE
FLOW COUNTING
VIRTUAL FENCE
ONE WAY PASS
MEANING
The DVR is checking the DCCS signal transmission between the DVR and camera.
The signal transmission is fine and the DCCS function works properly.
The signal transmission is too weak or not available for the DCCS function to work properly.
ADVANCE CONFIG
(For 16CH & 8CH models only)
DESCRIPTION
A virtual detection line is set to detect the moving direction of pedestrians for flow counting.
A virtual detection line is set to detect intruders crossing the detection line, and an alarm will be
triggered.
A virtual detection line is set to detect intruders from the specified direction, and an alarm will be
triggered.
28
CH3
FLOW COUNTING
OFF
07
SUBMIT
SETUP
OFF
MIDDLE
MAIN MENU