Avtech IVS Manual De Instrucciones página 8

6) CALL
Connect to a monitor specific for sequence display.
7) VGA
Connect to a LCD monitor directly.
Note: When both MONITOR and VGA are connected, press the right key ► on the DVR front panel during
DVR power-on to force the video output via VGA. For details, please refer to "5.5.6 DISPLAY" at
page 25.
8) IR
Connect the IR receiver extension line for remote control.
9) EXTERNAL I/O
This port is used to connect external devices (such as speed dome cameras or external alarm, etc).
For detailed I/O port PIN configuration, please refer to "APPENDIX 2 PIN CONFIGURATION" at page 53.
10) LAN
Connect to Internet by LAN cable.
11) DC 19V
Connect to the supplied adapter.
12) Power Switch
Switch to " " to turn on the power, and " " to turn off the power.
3
BEFORE USING THIS DVR