Firmware Upgrade; E-Map - Avtech IVS Manual De Instrucciones

Function
Download / Cancel

Firmware Upgrade

This function is used to grade your DVR for function scalability.
Note: Before using this function, make sure you have the correct upgrade files provided by your installer
or distributor.
Step1: Click " ", and select the IP address of your network camera in the address book.
Step2: Click " " to show the upgrade page, "Update Server".
Step3: Click "Add" to browse to the upgrade files.
Step4: Click "Upgrade Firmware" to start firmware upgrade.
Note: It takes a few minutes to finish the upgrade process. Do not disconnect the power during firmware
upgrade, or the upgrade may be failed. The camera will reboot after the upgrade.
Step5: Select the IP address of the camera and click "

6.1.4. E-Map

Video Viewer is also a Central Management System (CMS) software, which allows network device control &
management for up to 16 devices simultaneously.
Note: Before using this function, make sure Video Viewer is connected to all the devices (up to 16) you
want to monitor.
Description
To simply backup images without previewing, deselect the checkbox
"Simultaneous Playback". You will only see a message box indicating
the total time needed, the current status and the saving location.
Click "Download" to start or "Cancel" to discard the video backup.
" again to check if the firmware is upgraded.
39
REMOTE OPERATION