Pip Mode - BRAND Transferpette electronic Instrucciones De Manejo

PIP Mode

The standard program – a previously set volume is aspirated and then discharged.
Volume and speed adjustments are described on pages 42 and 43.
What to do
1.
Bring up the menu
2.
Select PIP mode
3.
Confirm PIP mode
4.
Prepare for
pipetting
5.
Aspirate liquid
46
How to do it
Press the MENU key three
times to bring up the mode
selection menu. ‚Mode'
blinks.
Use one of the arrow keys
to scroll through the modes
until ‚PIP' appears.
‚Mode' continues to blink.
Press the ENTER key.
The display now shows ‚blo'
for blow-out.
Press the pipetting key once
to move the piston into the
start position.
The arrow in the display
points upwards (aspiration).
Press the pipetting key once
to aspirate the liquid.
The Programs · Settings and Use
Keys to press Display readout
3x
1x
1x
1x