Motor/Tube Assembly; Wiring - SOMFY Sonesse Ultra 50 Manual Del Usuario

EN

2.1.3. Motor/tube assembly

1) Slide the motor into the roller tube.
•
wheel and not to the motor.
3) Slide the end cap into the roller tube and ensure that the
assembly is solid.
2.1.4. Installing the motor/tube assembly
The motorised product must not be compressed between the brackets.
bracket f and onto the motor bracket g
Ensure that the motor/tube assembly is secured onto the
when the roller blind reaches the lower end limit position.
2) For star head motors, ensure the stop ring h in place.

2.2. WIRING

Cables which pass through a metal wall must be protected and isolated using a grommet
-
-
Neutral
120V 60 Hz
White
100V 50/60 Hz
230V 50 Hz
220V 60 Hz
120V -60 Hz
52
Images not contractually binding
(N) (L1)
Black
Blue Black Brown
US PIGTAIL CONNECTOR CABLE
Neutral
(N) (L1)
White Black
Earth
( )
(L2)
Red Green
Yellow/
Green
Earth
( )
(L2)
Red Green
Copyright © 2014 -2017 Somfy SAS. All rights reserved.
1)
2)
15 mm
L1
3)
1)
g
2)
h
L1L2N
N
L1 L2
5 mm
20 mm
f