Install Supply Hoses - Bradley Halo S19-500 Serie Manual De Instrucciones

S19-500 Series & S19-505 Series
1
Install Faucet Assembly
A
Install the supply hose to the bottom of the faucet
assembly.
B
Install the gasket to the bottom of the faucet
assembly.
C
Install bolt studs into the base of the unit, and
then set the faucet assembly onto the sink.
For thin sink decks, connect the mounting plate
D
to the spacer with the provided screws, and then
secure studs with the provided nuts. For thinner
decks, discard the spacer. Snug tight to the sink.
E
Install the desired flow control.
8
1½" Max.
Deck Thickness
7/6/2021
Flow Control
1½" Dia.
Hole
Nut
(Max. torque
is 32 in-lb.)
Bradley • 215-1910 Rev. D: ECO 21-05-013
Installation
Supply
Hoses
Faucet
Assembly
Faucet
Assembly
Gasket
Sink Top
Spacer (only required if
deck & sink combined
thickness is less than ½")
Mounting
Plate
Screw
Stud