Additional Tires - Rapid Mondo 1550 Manual De Instrucciones

6.7

Additional tires

Additional tires increase the suitability for slopes.
Mounting
• Mount the mounting flange (1) to the machine.
Two tires, wheel + cage wheel:
• Align mark (A) on the cage wheel to the mounting flange by means of the positioning rib
(B).
• Mount cage wheel to the mounting flange (1) with special screw (2).
Two tires, wheel + twin tires:
• Mount mounting flange (3) to twin wheel with wheel nuts (4) and screws (5).
• Jointly align positioning ribs (C) of the driver flanges.
• Mount twin wheel to the mounting flange (1) with screw (6). Tighten screw (6) using a
suitable tool (7).
For the twin wheel, you can choose between the two mounting flanges 60 mm and 114 mm.
The machine can suddenly trap the user or third persons, cause them to fall over or run
them over.
• Maximum two tires are permitted on one side.
Machine no. from CI 1001
Note
Warning
EN
123