Carl F. Bucherer Manero chronoperpetual Instrucciones página 4

Set the moon phase / leap year and month
note for 2100: Because of this very complicated
mechanism, the watch will handle all of the date
switches without a problem until the year 2100.
this is because February 2100 has only 28 days,
rather than the 29 that would be usual in a leap
1 Press corrector A repeatedly
until the "full moon" position
is shown in the moon phase.
the full moon is completely
visible. use a calendar to
determine the date of the
last full moon.
2 Press corrector A for the
number of days since the
last full moon.
En 8
year. on 1 March 2100, a simple manual date
correction has to be done as a result.
3 set the date: Press corrector
c repeatedly until the date
indicator shows 1.
4 Press corrector D repeatedly
until the current year is
shown (IIII = leap year, I = 1
year after leap year, etc.).
5 continue to press corrector
D repeatedly until the
current month is shown.
Set date / day of the week
Warning: the correctors must not be used
between 8:00 p.m. and 2:00 a.m. because doing
so can damage the movement.
1 set the current date by
pushing corrector c.
2 set the current day of the
week by pushing corrector B.
Set time
In order for the date to properly move at midnight,
the hour hand must intentionally be set to a.m. or
p.m. based on the current time.
1 Pull the crown until it is in
position 1. the second hand
does not move.
2 Intentionally set the
current time at a.m. or p.m.
by rotating the crown.
3 Push the crown back to the
initial position. the second
hand is back in motion.
9 En