Skymsen ML Manual De Instrucciones página 11

Before turning on the machine:
Place the product to be cut on the Movable Table No. 01 (Picture 08).
Adjust the Blade GUide No. 02 (Picture 08)Ajuste o Guia da Lâmina N°02 (Fig. 08) para que
a zona de corte (área exposta da Lâmina) tenha apenas a altura da peça a ser cortada.
Stand in front of the Mini Saw to be able to see the front view of the Cutting Blade.
PICTURE 08
02
01
Turn on the machine:
To turn on the machine press and release the "I" button on the ON/OFF Switch.
Define the thickness of the slice tp be cut and cut sliding the product on the Fixed Table
against the Blade.
After cutting the slice, use the right hand to remove it. The slice must ALWAYS be removed
by the back of the Blade to avoid contact from the hand on the cutting area.
Place or pile the slices on the Fixed Table.
When you finish the last slice, turn the machine OFF pressing the ON/OFF Switch to
position "0".
IMPORTANT
Never remove the processed product (sliced) from the front of the Blade.
11