Technical Characteristics; Technical Features; Installation And Pre Operation; Installation - Skymsen ML Manual De Instrucciones

1.3 Technical Characteristics

FEATURES
Net Weight
Gross Weight
Cuting Height
Cuting Width
Height from Foot to Table

2. Installation and Pre Operation

2.1 Installation

2.1.1 Positioning
The equipment must be positioned on a firm and level surface. See in the picture below
the area necessary for the installation of the same:

2.1.2 Electrical installation

This equipment was developed for 110, 220 or 230 - 240 Volts (50 or 60 Hz). On receiving
the machine check tension reported in existing label on the power cord.
The power cord has 3 round pins, where one of them is the ground pin-earthed (grounded).
It is mandatory that the three points are properly connected before the equipment.
6
Voltage
Frequency
Power
Height
Width
Depth
FRAME 01
UNIT
V
Hz
CV
mm
mm
mm
kg
kg
mm
mm
mm
855mm
INSTALLATION
AREA
FRONT
ML ML
110 220
60 50 or 60
0,75 0,75
900 900
560 560
535 535
34 34
45,5 45,5
200 200
200 200
340 340
650mm
ML
230 or 240
50
0,75
900
560
535
34
45,5
200
200
340