Lower Wheel - Skymsen ML Manual De Instrucciones

3.2.4 Blade
The cutting blade must be installed with the teeth to the front of the machine and pointing
down. To calibrate (stretch) the Blade No. 01 (Picture 04), turn the Calibrator Handle Blade
No. 02 (Picture 04) counterclockwise.
02
01

3.2.5 Lower Wheel

The Lower Wheel N°01 (Picture . 05) is assembled on the lower rolling axis and tied to the
clip No. 02(Picture 05). This clip must always be positioned in the shaft keyway
The lower Wheek can be removed to the cleaning after removing the Blade (check item 3.3
Cleaning and Sanitizing).
02
PICTURE 04
PICTURE 05
01
9