Safety Notes - CST/BERGER MP3 Manual Original

Safety Notes

Point Laser
Working safely with the measuring tool is possible only
when the operating and safety information are read com-
pletely and the instructions contained therein are strictly
followed. Never make warning labels on the measuring
tool unrecognisable. SAVE THESE INSTRUCTIONS.
Caution – The use of other operating or adjusting equipment or the
application of other processing methods than those mentioned
here, can lead to dangerous radiation exposure.
The measuring tool is provided with a warning label in English
(marked with number 7 in the representation of the measuring tool
on the graphics page).
Do not direct the laser beam at persons or animals and do
not stare into the laser beam yourself. This measuring tool
produces laser class 2M laser radiation according to
IEC 60825-1. Looking or viewing directly into the laser beam –
especially with optical instruments such as binoculars etc. – can
damage the eye.
Do not use the laser viewing glasses as safety goggles. The laser
viewing glasses are used for improved visualisation of the laser beam, but
they do not protect against laser radiation.
Do not use the laser viewing glasses as sun glasses or in traffic. The
laser viewing glasses do not afford complete UV protection and reduce col-
our perception.
Have the measuring tool repaired only through qualified special-
ists using original spare parts. This ensures that the safety of the meas-
uring tool is maintained.
Do not allow children to use the laser measuring tool without
supervision. They could unintentionally blind other persons or themselves.
Do not operate the measuring tool in explosive environments, such
as in the presence of flammable liquids, gases or dusts. Sparks can
be created in the measuring tool which may ignite the dust or fumes.
18 | English
2 610 A15 119 • 22.10.09