Maintenance And Service; Maintenance And Cleaning; After-Sales Service And Customer Assistance - CST/BERGER MP3 Manual Original

XP5: For checking right angles in the horizontal plane (e. g. between two sur-
faces), align the measuring tool in such a manner that the distance between the
surface A and the first point beam is equal at two points. Now, check the dis-
tance between surface B and the second point beam at two points. When the
distance is also equal, the surfaces are at a right angle.
Projecting Heights (see figure G)
Mount the measuring tool to the holder 9. Adjust the universal holder roughly
before switching on the measuring tool. Align a point beam to the requested
height. Turn the measuring tool to the target location without changing its
height and project or check the height at the target location.

Maintenance and Service

Maintenance and Cleaning

Store and transport the measuring tool only in the supplied protective pouch.
Keep the measuring tool clean at all times.
Do not immerse the measuring tool in water or other fluids.
Wipe off debris using a moist and soft cloth. Do not use any cleaning agents
or solvents.
Regularly clean the surfaces at the exit opening of the laser in particular, and
pay attention to any fluff of fibres.
If the measuring tool should fail despite the care taken in manufacturing and
testing procedures, repair should be carried out by an authorised after-sales
service centre for Bosch power tools. Do not open the measuring tool yourself.
In all correspondence and spare parts orders, please always include the
10-digit article number given on the type plate of the measuring tool.

After-sales Service and Customer Assistance

Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: boschservicecentre@bosch.com
28 | English
2 610 A15 119 • 22.10.09