Descargar Imprimir esta página

TUBESCA-COMABI SPEEDY + Instrucciones De Montaje página 47

Publicidad

SPEEDY +
La portée de cette vérification dans le cas de la tour mobile accès et de travail étant comparable à la vérification journalière, on
formalise sur le registre de sécurité de l'établissement la vérification réalisée a minima une fois tous les 3 mois.
Nota bene : Ces vérifications ne peuvent être conduites que par du personnel titulaire d'une attestation de compétence délivrée
par le chef d'établissement portant la mention « Vérificateur et Utilisateur ».
Pour plus de renseignement et de détails au niveau des grilles de vérification, voir la RECO R.457, annexe 3, 3bis, 4, 5, 6.
• After use at each site, ensure that the mobile tower is cleaned with a clean cloth.
Inspect parts before each assembly, particularly:
- Castor wheels tyres and brakes.
- Safety devices.
- Working platform hooks and fasteners.
- The plywood on the working platforms.
- The stabiliser mounting brackets.
All parts with the following defects:
- Permanent deformation.
- Perforations.
- Score marks (as a result of grinding, for example...)
- Severe oxidation
... should be discarded!
If in doubt, change the part.
When the part is being changed, it must be replaced with a genuine part.
Keep parts clean, and safety devices in good working order.
Replace or clean all the panels or stickers with operating and safety instructions.
Checks:
• This product should be checked periodically and the results of these checks should be recorded (see the manufacturer check
sheet FV-02408-1XX).
st
Regulatory checks (provided for in the French decree of 21
December 2004) are outlined as follows:
A check prior to use at each installation site:
- when the mobile tower is used for the first time,
- when the mobile access and working tower is dismantled and then re-assembled.
- following changes in usage conditions, or atmospheric or environmental conditions which may affect the safe use of the mobile
access and working tower,
- when the tower has not been used for at least a month.
This check should include a suitability assessment, an assembly and installation assessment, as well as an assessment of its
condition. This check will be recorded in the establishment's safety records for traceability.
A daily check
This is a condition assessment.
This check will be recorded on a sheet attached to the access hatch for traceability.
47

Publicidad

Capítulos

loading