User Maintenance; Using Sterile Drapes; Replacing The Fuses; Periodic Maintenance Schedule - Stryker 1488 Serie Manual Del Usuario

Idiomas disponibles

User Maintenance

Using sterile drapes will ensure maximum longevity of your 1488 HD

Camera Head. For best results, follow the instructions provided by the drape

manufacturer.

To avoid the risk of fire, use only fuses of the value specified on

the fuse label located on the rear panel of the console.

Unplug the power cord from the wall outlet and remove the cord from

the transmitter console.

Unlatch the fuse holder above the AC inlet and remove it. (You may need

to press the tab on the fuse holder with a slender screwdriver to release

Replace the fuse with the same value and rating.

Reinstall the fuse holder until the tab snaps in place.

To ensure safe operation of the Model 1488 HD Video Camera

you should periodically perform the following procedure:

Every 12 months, check the earth leakage current to <500 µA (<300 µA

in USA), ground protective earth impedance to <0.1 ohms, and power

consumption less than or equal to rated power. Use a true RMS digital

multimeter and safety analyzer to perform this test.

Note: Refer calibration and operating difficulties not detailed in this manual

to your Stryker Endoscopy sales representative.

This product contains electrical waste or electronic equipment.

It must not be disposed of as unsorted municipal waste and

must be collected separately in accordance with applicable

national or institutional related policies relating to obsolete

electronic equipment.

Dispose the 1488 HD according to local laws and hospital practices.

All manuals and user guides at all-guides.com