Remaining Risk Factors - HOLZMANN MASCHINEN TK 255 Manual De Instrucciones

SAFETY
13.3

Remaining risk factors

It is important to ensure that each machine has remaining risks.
In the execution of all work (even the simplest) greatest attention is
required. A safe working depends on you!
Even if the machine is used as required it is still impossible to eliminate certain residual risk
factors totally. The following hazards may arise in connection with the machine´s construction
and design:
 Risk of injury to the hands / fingers by the rotating saw blade during operation.
 Risk of injury due to sharp edges of the workpiece, especially in non-fixed with a
suitable tool / device workpiece
 Risk of injury: hair and loose clothing, etc. can be captured and wound up! Safety
regulations must be observed with regard to clothing.
 Risk of injury due to contacting with live electrical components.
 Risk of injury due to dust emissions, treated with harmful agents workpieces
 Risk of injury to the eye by flying debris, even with safety goggles.
 Risk of injury due to kickback:
Kickback is a sudden reaction to a jamming, grinding or staggered blade. This causes
the ejection of the workpiece to the direction of the operator.
These risk factors can be minimized through obeying all security and operation instructions, proper
machine maintenance, proficient and appropriate operation by persons with technical knowledge
and experience.
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
WARNING
29
TK 255