INFOSEC UPS SYSTEM E6 LCD RT Evolution TX 5 KVA Guia Del Usuario página 9

To install in 6U, it's not necessary to use short extensions.
Step 1

Assemble two feet and two
long extensions together.
Then, one set of plastic
supporter with 26cm width is
done. Another set
supporter could
assembled in same way.
Install UPS module with ISO bank and one battery bank in 6U
Step 1

Assemble two feet and three
long extension -s with one
short extension as one tower
stand.
INFOSEC UPS SYSTEM - 4, rue de la Rigotière - 44700 Orvault - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 05 13 AA 59 206 14
All manuals and user guides at all-guides.com
Step 2

Align the two
approximately 35cm apart in
of
step 2.
be
Step 2

Align the two
approximately 35cm apart
Step 3

Then, put UPS module and battery bank
in the stands as shown in step 3. Be
stands sure that the LCD of UPS should be on
upper half part of front panel. And
assemble these metal plates and M4
screws as shown in step 4.
Step 3

Then, put UPS module, ISO bank and
stands
battery bank in the stands. And assem -
ble these metal plates and M4 screws
9