Tool Fitness SE 400 Manual Del Usuario página 29

All manuals and user guides at all-guides.com
C. Keep pulse detecting.
D. Time will count down from 60 seconds to 0 second.
E. When time reaches 0, the test result (F1-F6) appears on the display.
F1=Excellent F2=Good F3=Fair F4=below average F5= No Good F6=
Poor(See fig 42)
F. If the computer does not detect your current heart rate first, pressing RECOVERY
will not enter into pulse recovery test. During the pulse recovery test, press RECOVERY
to exit the test and return to the stop status.
4. Pulse Measurement
Please place both your palms on the contact pads and the computer will show your
current heart beat rate in beats per minute (BPM) on the LCD after 3~4 seconds. During
the measurement, heart icon will flash with simulative ECG showing.
Remark: During the process of pulse measurement, because of the contact jamming, the
measurement value may not be stable when start, then it will return to normal level. The
measurement value cannot be regarded as the basis of medical
treatment.
NOTE:
If the computer is also equipped with wireless heart rate measuring via the